Prototypes‎ > ‎PRODOS‎ > ‎

Printed Parts

Parts Overview

posted May 17, 2011, 12:03 AM by Jonathan Dowdall   [ updated Aug 6, 2011, 11:41 AM ]

Prodos consists of 39 printed plastic parts composed of 19 different unique parts.  The stl versions of the parts can be downloaded together or individually in the subsequent entries.  Printing all of the parts on a Makerbot Cupcake takes around 18.5 hours (of total print time ... set up time and botched parts will likely double this time) and take a total 327cc of plastic (less than a 5lb spool of plastic from the Makerbot store).

Part 1 : Toe

posted Apr 16, 2011, 12:27 PM by Jonathan Dowdall   [ updated May 5, 2011, 9:20 AM ]

This part is the toe of each foot.  It is a modified joint inner bracket.
Count 2
Plastic  6 cc
Print Time  20 min
 Files    
 STL

Part 2 : Heel

posted Apr 16, 2011, 12:25 PM by Jonathan Dowdall   [ updated May 5, 2011, 9:21 AM ]

his part is the heel for each foot.  It is a modified outer bracket.
Count
2
Plastic  15 cc
Print Time  52 min
 Files    
 STL

Part 3 : Foot Frame

posted Apr 16, 2011, 12:23 PM by Jonathan Dowdall   [ updated May 5, 2011, 9:21 AM ]

This part is the frame for the foot.
Count 2
Plastic  4 cc
Print Time  13 min
 Files    
 STL

Part 4 : Joint Inner Bracket

posted Apr 16, 2011, 12:20 PM by Jonathan Dowdall   [ updated May 5, 2011, 9:22 AM ]

This part is the inner bracket for each joint.  It connects a frame to an outer joint bracket.
Count 8
Plastic  8 cc
Print Time  28 min
 Files    
 STL

Part 5 : Lower Leg Frame

posted Apr 16, 2011, 12:17 PM by Jonathan Dowdall   [ updated May 5, 2011, 12:23 AM ]

This part is the frame for the lower leg.
Count2
Plastic 7 cc
Print Time21 min
 FilesSTL

Part 6 : Joint Outer Bracket

posted Apr 16, 2011, 12:14 PM by Jonathan Dowdall   [ updated May 5, 2011, 9:23 AM ]

This part is the outer bracket for each joint.  It connects a frame to an inner joint bracket using two radial bearings.
Count 6
Plastic  9 cc
Print Time  32 min
 Files    
 STL

Part 7 : Middle Leg Frame

posted Apr 16, 2011, 12:11 PM by Jonathan Dowdall   [ updated May 5, 2011, 9:24 AM ]

This part is the frame for the middle leg.
Count 2
Plastic  5 cc
Print Time  17 min
 Files    
 STL

Part 8 : Upper Leg Frame

posted Apr 16, 2011, 12:10 PM by Jonathan Dowdall   [ updated May 5, 2011, 9:18 AM ]

This part is the frame for the upper leg section.
Count 2
Plastic  5 cc
Print Time  16 min
 Files    
 STL

Part 9 : Left Frame Strut

posted Apr 16, 2011, 12:05 PM by Jonathan Dowdall   [ updated May 6, 2011, 12:05 AM ]

This part is the left frame strut. It connects the body to the left leg.  It mounts to the right frame strut, bottom body panel, and the left leg.
Count 1
Plastic  17 cc
Print Time  54 min
 Files    
 STL

1-10 of 20